BPI^® UV/Visible Mini Photometer™
The first portable, hand-held photometer!

• Reads UV or visible light transmission percentage.
• Test either lenses or lenses in frames.
• Powered by a standard 9 volt battery.
• Battery life is about 40 hours with the display on.
• Easy to use. Calibrate, left button for visible, right for UV.
• It can be calibrated for either 380 or 400nm UV standards.
• A compensation table for lens power is on the back panel.
• The unit automatically shuts down after either button release.
• 5.625" long x 3.25" wide x 3.375" high.
• 14.3 cm long x 8.2 cm wide x 8.6 cm high.
• 8.7 oz (with battery).
• 0.25 kg (with battery).
> BPI Photometers

BPI^® Turbo 6™
The new BPI^® system for tinting today’s lenses.

It features automatic solution mixing and the method of heating the beakers prevents dye crystallization. The beakers are only heated from the sides. The system uses BPI^® GL-77™ heat transfer fluid. It is made of 100% stainless steel and is constructed from UL listed components (USA Underwriter’s Laboratory) and meets or exceeds the European CE standards. It holds six 1.05 quart beakers and has a 5 year limited warranty. A complete set-up package is included.
> BPI Turbo Tinters™

BPI^® Mark Off!™
Quickly removes the marks from a progressive lens!

Quickly removes the marks from a progressive lens! The fiber tip incorporates a valve that shuts off flow of the liquid when not in use. Just press the tip to open the valve, when the tip is moist, draw over the marks. Wait a few seconds and wipe clean!
> Mark Off™

BPI^® Jet Black™
The new light gray to black tint

BPI^® Jet Black™ has the advantage that it can be used to tint from light shades of gray up to sunglass densities. It has a long tank life and is fade resistant. It is available in a three fluid ounce bottle(88 ml) that makes a quart of solution.
BPI# 46304 (3 oz bottle)
BPI# 48801 (6-pack)
> Standard Colors

BPI^® Mocha™
The new light to medium brown tint

BPI^® Mocha™ is a new honey-brown color suitable for light to medium tints.
BPI# 34702 (3 oz bottle)
BPI# 34602 (6-pack)
> Standard Colors

BPI^® Spotless Pearls
Stops white spots from forming on hard coated lenses

Some hard coated lenses may exhibit blotches, white spots or unusual color variations due to ionic and irregular surface charges. In these cases, use BPI® Spotless Pearls™ when the tints have been mixed with distilled or de-ionized water.
BPI# 37894
> Lens Tinting Solutions

BPI^® Lorgnettes
The new way to display tint samples

BPI^® laser-cut CR-39^® Lorgnettes are a different way to show samples of tinted lenses that allow your patients to have a better idea of how their sunglasses or fashion tints will appear. BPI^® Lorgnettes are available either clear or with your choice of BPI^® tints. A white display is also available.
> Lens Displays

BPI^® Polariscope
Hand-held lens stress tester

A small, hand-held device that can be used for checking the stresses imposed on lenses by frames.
BPI# 16204