 |
 |
 |
| BPI® Red Out™ | BPI® Color Developer™ | BPI® Xcelerator™ |
|
Eliminates red tones |
Extends tint life |
Reduces tinting time by up to 65% |
| BPI# 37844 | BPI# 71502 | BPI# 71001 |
| 4oz (110ml) | 4oz (110ml) | 4oz (110ml) |
| BPI® Red Out™ helps eliminate one of the most common tint problems, red tones in a dark gray or dark brown lens. This color correction is made by dipping the lens for a few seconds into hot Red Out™ solution. | Add a few drops of BPI® Color Developer™ daily to your tint solution for consistently vivid colors. Reduces streaking and spotting of the tint, eliminates agglomerations without interfering with tinting and re-suspends tint pigments for color uniformity. | It clears the way for better tinted lenses - faster and color consistent, without spots or blotches. It's also long lasting and super-concentrated. Add to your tank just once and your tint will last longer too. It also reduces evaporation by more than one-third. For uncoated lenses only. |
|
|
|
|
 |
 |
 |
| BPI® Water Soft™ | BPI® Odor Lid™ | BPI® Smells So Good™ |
|
Improves water quality |
Controls lab odors |
Makes tint tanks smell like flowers! |
| BPI# 71600 | BPI# 71002 | 8 great fragrances! |
| 16oz (473ml) | 4oz (110ml) | 1oz (30ml) |
| BPI® Watersoft™ improves water quality for better tint color. Watersoft™ modifies the hardest water, acts as a sequestering agent for multivalent metallic ions. Use as a surfacing solution or add a few drops per quart of tint solution for better color. | BPI® Odor Lid™ helps control lab odors. It traps vapors in a molecular filter to leave your lab without a trace of chemical odors. |
BPI# 71004 Strawberry |
 |
|
|
 |
 |
 |
|
BPI®
Spotless™ BPI® Spotless™ Pills |
BPI®
Spotless Pearls™ |
BPI®
Stabilizer™ BPI® Stabilizer™ Pills |
|
Stop blotches & white spots |
Stop blotches & white spots on hard coated lenses |
Maintains an even pH |
| BPI# 37891 8 oz
(236 ml) BPI# 37892 50 pills |
BPI# 37894 4oz (110ml) |
BPI# 37890 8oz
(236ml) BPI# 37893 50 pills |
| Stop blotches and white spots! Some hard coated lenses will exhibit blotches, white spots, and unusual color variations due to ionic and irregular surface charges. These lens surface difficulties can be minimized by using one capful of BPI® Spotless™ to a quart tank of tints. | Some hard coated lenses will exhibit blotches, white spots, and unusual color variations due to ionic and irregular surface charges. In these cases, use BPI® Spotless Pearls™ when the tints have been mixed with distilled or de-ionized water. | After prolonged use, the normal pH of tint solutions may change from a neutral 7. BPI® introduces a pH stabilizer for your tint tanks. A capful of BPI® Stabilizer™ will keep a tint bath in the 7 pH range without affecting the colors of your tints. |
|
|
|
|