 |
 |
|
BPI®
Advanced Computer |
BPI®
Production Computer |
| Two tanks - 24 lenses per tank | One tank - 72 lenses per session |
| Crown and photochromic simultaneously | Process either crown or photochromic |
| 2 or 16 hour process | 2 or 16 hour process |
| BPI# 7792 (110v) | BPI# 207805 (220v) | BPI# 7793 (110v) | BPI# 2077883 (220v) |
| Left to right: 15.5in | 39.4cm | Left to right: 15.5in | 39.4cm |
| Front to back: 16.5in | 41.9cm | Front to back: 16.5in | 41.9cm |
| Height: 22in | 55.9cm | Height: 22in | 55.9cm |
| Weight: 90lbs | 40.8kg | Weight: 90lbs | 40.8kg |
| Amperage: 13 amps | Amperage: 13 amps |
| Fuse: 20 amps 250v. | Fuse: 20 amps 250v. |
| Set-up Kit: 2 tanks of salt. 2 lens racks. 2 lids. 1 lid removal tool. Battery back-up. Instruction manual. | Set-up Kit: 1 tanks of salt. 1 lens racks. 2 lids. 1 lid removal tool. Battery back-up. Instruction manual. |
| The Computer Chem Temp III™ is fully automatic from immersion to retraction and tempers both photochromic and crown simultaneously. You can also configure the system to do all photochromic or all crown lenses. The control center shows elapsed time and temperature for each of the 2 removable tanks. You can choose to heat 1 tank only. During power failures, a back up battery system automatically removes lenses from the tanks and continues operation when the power returns. 16 hour or 2 hour cycles may be selected. Please specify either 16 hour or 2 hour photochromic salts. | The Production Computer Chem Temp™ is fully automatic from immersion to retraction and tempers either photochromic or crown. You can configure the system to do all photochromic or all crown lenses. 16 hour or 2 hour cycles can be selected. The control center shows elapsed time and temperature for the tank. In case of power failure, a back-up battery system automatically removes lenses from the tank and continues operation when the power returns. This unit comes with 1 removable tank of either photochromic or crown salts. Please specify 2 or 16 hour photochromic salts. |
 |
 |
|
BPI®
Computer Heat Temp III™ |
 BPI®
'Square Shooter'™Drop Ball Tester |
| BPI# 16202 (110v) | BPI# 216200 (220v) | BPI# 19105 - 5/8" ball. (Dress eyewear) |
| Left to right: 13.5in | 34.3cm | BPI# 19103 - 7/8" ball. (Safety eyewear) |
| Front to back: 12in | 30.5cm | BPI# 19102 - 1" ball. (Safety eyewear) |
| Height: 18in | 45.72cm | BPI# 19104 - With two ball sizes |
| Weight: 78lbs | 35.38kg | Left to right: 10in | 25.4cm |
| Amperage: 10 amps | Front to back: 10in | 25.4cm |
| Fuse: 20 amps 250v. | Height: 52in | 133cm |
| Set-up Kit: Instruction manual. | Meets all applicable FDA and ANSI standards |
| The Computer Heat Temp II™ eliminates guesswork when heat tempering lenses. This unit automatically heat tempers lenses in minutes. All the computer requires is the type of glass and average thickness. Due to uniform cooling of lens surfaces and edges, breakage is minimized. The instrument has a side-mounted polariscope for quality control. | Test your tempered lenses with The Square Shooter™ Drop Ball Tester. . We manufacture three models of the Square Shooter™ Drop Ball Tester. The three units deliver either a 5/8", 7/8" or 1" diameter steel ball and have been designed for use with either ophthalmic lenses, or safety/industrial lenses. Also available with your choice of two tubes. |