BPI®
Lens Holder II™

 BPI® UV
Lens Holder II™		 BPI® 3 Point
Lens Holder II™		 BPI® Slant
Lens Holder II™
BPI# 9600 BPI# 8300 BPI# 9603 BPI# 9700
The original and most popular. Used by more than 40,000 labs. Holds two lenses. Stainless steel and heat resistant plastic. Only BPI’s unique torsion bar design prevents lens warping, scratching, and bending of the lenses while tinting. The white color makes the holder visibly different and will show color if inadvertently immersed in tint.  This makes it ideal for UV tinting and other operations that need to be kept isolated from cross-contamination. Perfect for lenses of unusual shapes. The BPI Three Point Lens Holder II™ holds two lenses. It is made from stainless steel and heat resistant plastic. The upper clamp has one point of contact with the lens. The lenses are held at an angle instead of vertical allowing the creation of smooth and subtle gradients. Ideal for pilot or asymmetrical lenses.
Note: It will not fit into mini tanks.

UNIQUE
TORSION BAR
DESIGN

As the adjustable clamp moves up and down the stainless steel guides, the torsion bars flex to keep
the clamp and the lenses firmly in place and eliminate slippage.

3 POINTS OF
CONTACT CAN BE
BETTER THAN 4

RED ARROWS (L) INDICATE MID-POINT 
OF GRADIENT

NO PRESSURE IS
EXERTED ON
THE LENS!

WHEN TINTING
SOME UNUSUAL
LENS SHAPES

When the lens is rotated to the vertical the mid-point is now at different heights on the front and the back of the lens.

BPI® 'Bouncer'
Slant Lens Holder II™		 BPI® 'Bouncer'
Lens Holder II™		 BPI® Dual
Lens Holder II™		 BPI® Triple Pair
Lens Holder II™
BPI# 9604 BPI# 9601 BPI# 9500 BPI# 11901
The spring action enhances the gradient shading while the lenses are held at an angle allowing the creation of smooth and subtle gradients.

Note: It will not fit into mini tanks. (Pint, 0.47L)
The spring stretches and contracts during the gradient process. It can be used in Mini-Tanks. (Pint, 0.47L)		 . This lens holder can hold two pairs of different sized lenses.

Also available: BPI® White Dual UV Lens Holder II™
BPI# 9501		 Holds six lenses. It is made from stainless steel and heat resistant plastic.

This lens holder can hold three pairs of the same size lenses.
Home Page Lens Racks