BPI Frame Warmers

BPI^® Hot Air Frame Warmer II™	BPI^® Stainless Steel Frame Warmer™
BPI# 15902 (110v) \| BPI#215902 (220v)	BPI# 15901 (110v) \| BPI#215901 (220v)
Left to right: 6in \| 15.24cm	Left to right: 11.25in \| 28.57cm
Front to back: 13.75in \| 34.92cm	Front to back: 8.25in \| 20.95cm
Height: 9in \| 22.86cm	Height: 8.75in \| 17.14cm
Weight: 17lbs \| 7.7kg	Weight: 10lbs \| 4.5kg
Amperage: 10 amps	Amperage: 2 amps	Fuse: 5 amps, 250 volts
Fuse: 10 amps, 250 volts	Glass beads included
The Hot Air Frame Warmer II™ is easy to use and easy to control! It has a thermostat for unlimited temperature settings. Frames can be warmed and adjusted in only a few seconds. It is made from stainless steel and powder-coated aluminum for long life. For normal operation of the unit, turn on the main switch. This will turn on the fan and cool air will start circulating. To heat up the system, turn the heater switch on and adjust the thermostat dial to the desired setting. The instrument is made from UL (US Underwriters Laboratory) components.	The Stainless Steel Frame Warmer™ is a bead type frame warmer with an all stainless steel construction. The power control allows a temperature range of 130 to 230°F. (54 to 110°C). The temperature control dial has three main settings: • HIGH setting will reach approximately 230° F. (110°C) • MEDIUM setting will reach about 190° F. (88°C) • LOW setting will reach approximately 130°F. (54°C) The low setting is used for most plastic frames. The unit is not restricted to the 3 main settings. The instrument is made from UL (US Underwriters Laboratory) components.

BPI^® Hot Air Frame Warmer II™	BPI^® Stainless Steel Frame Warmer™
BPI# 15902 (110v) \| BPI#215902 (220v)	BPI# 15901 (110v) \| BPI#215901 (220v)
Left to right: 6in \| 15.24cm	Left to right: 11.25in \| 28.57cm
Front to back: 13.75in \| 34.92cm	Front to back: 8.25in \| 20.95cm
Height: 9in \| 22.86cm	Height: 8.75in \| 17.14cm
Weight: 17lbs \| 7.7kg	Weight: 10lbs \| 4.5kg
Amperage: 10 amps	Amperage: 2 amps	Fuse: 5 amps, 250 volts
Fuse: 10 amps, 250 volts	Glass beads included
The Hot Air Frame Warmer II™ is easy to use and easy to control! It has a thermostat for unlimited temperature settings. Frames can be warmed and adjusted in only a few seconds. It is made from stainless steel and powder-coated aluminum for long life. For normal operation of the unit, turn on the main switch. This will turn on the fan and cool air will start circulating. To heat up the system, turn the heater switch on and adjust the thermostat dial to the desired setting. The instrument is made from UL (US Underwriters Laboratory) components.	The Stainless Steel Frame Warmer™ is a bead type frame warmer with an all stainless steel construction. The power control allows a temperature range of 130 to 230°F. (54 to 110°C). The temperature control dial has three main settings: • HIGH setting will reach approximately 230° F. (110°C) • MEDIUM setting will reach about 190° F. (88°C) • LOW setting will reach approximately 130°F. (54°C) The low setting is used for most plastic frames. The unit is not restricted to the 3 main settings. The instrument is made from UL (US Underwriters Laboratory) components.