 |
 |
| BPI® Production Computer Gradient™ | BPI® Advanced Custom Computer Gradient III™ |
| BPI# 13401 (110v) | BPI# 12609 (110v) |
| BPI# 213401 (220v) | |
| A
device for putting a thin film coating onto lenses and other
substrates. This dip coater combines 2 gradient heads operated
simultaneously from a single control
box. It is easily positioned behind a dip coating bath. When ordering, request Advanced Custom Computer Gradient programming module. One year warranty. |
Based on gradient lens tinting technology, the instrument has a solid state control center separate from the gradient head. The motor drives the lens holder by means of a long screw for continuous motion. It dips a lens or other subtrate rapidly into the coating solution and then withdraws it at a constant programmable rate over a period up to 99 minutes, leaving a thin film coating. One year warranty. |
|
|
| BPI® Production Computer Gradient™ | BPI® Advanced Custom Computer Gradient III™ | |
| Height: | 19in (48.26cm) |
Unit head: 10.5in (26.6cm) Mounted on pole: 21in (53cm) |
| Left to right: | 12in (30.5 cm) | 3in (7.6cm) |
| Front to back: | 9in (22.5cm) | 12.75in (32.38cm) |
| Weight: | 10 lbs (4.5 kg) | 7lbs (3.175kg) |
| Fuse: | 1 amp | 1 amp |
| Amperage: | 1 amp | 1 amp |
|
Set-up kit:
|
4 gradient stand 1 lens rack Instruction manual |
1 nylon swivel 2 thumbscrews 1 Lens holder 1 L-rod 1gradient tip 1 extension arm Gradient pole. Instruction manual |